Basket Type Cable Tray And Trunking-manufacture,factory,supplier from China

Introduction of the product：Cable trays are divided into trough type, tray type, ladder type, mesh kind and different structures, consisting of brackets, assist hands and set up accessories. When selecting, interest have to be paid to whether or not all elements of the bridge meet the necessities of serialization, generalization, and standardization as a entire set.

Introduction of the product：1.Wire mesh cable trays have excessive power to assist massive portions of community cables.2.Resist corrosion, warmness due to the fact of pre-galvanized, hot-dipped galvanized, powder covered floor treatment.3.Excellent air flow and warmness dissipation performance, which can shop the misplaced in the system of electricity transmission;4.

Introduction of the product：When finding out on a vertical shaft cable tray, it is vital to assume about the on-site environment and technical requirements. If it is quintessential to protect electrical interference or defend in opposition to exterior environmental influences, a specific sort of cable tray ought to be selected.

Introduction of the product:Molded cable tray is a form of energy-saving cable tray, which now not solely reduces the weight of the cable tray, however additionally improves its energy and load potential via a different molding process, and at the equal time has suitable corrosion resistance and stunning structure.

Introduction of the product：Tray type cable trays, which are cable trays with heat dissipation holes, are mainly classified according to their structural characteristics.

Introduction of the product：1.Wire mesh cable trays have excessive energy to aid giant portions of community cables.2.Resist corrosion, warmth due to the fact of pre-galvanized, hot-dipped galvanized, powder covered floor treatment.3.Excellent air flow and warmth dissipation performance, which can store the lost in the system of energy transmission;4.

Introduction of the product：1.Wire mesh cable trays have immoderate strength to useful resource large parts of neighborhood cables.2.Resist corrosion, heat due to the truth of pre-galvanized, hot-dipped galvanized, powder protected ground treatment.3.Excellent air float and warmness dissipation performance, which can save the misplaced in the device of strength transmission;4.

Introduction of the productLadder cable tray is a oftentimes used cable laying equipment. Its blessings in general encompass the following aspects:1. High house utilization: The ladder cable tray adopts a ladder structure, which can efficiently make use of space, making the cable laying greater compact and saving space.2. Easy to install: The set up of the ladder cable tray is very simple. You solely want to bring together the a number of components.

Introduction of the product：Cable trays are divided into trough type, tray type, ladder type, mesh type and other structures, consisting of brackets, support arms and installation accessories. When selecting, attention should be paid to whether all components of the bridge meet the requirements of serialization, generalization, and standardization as a complete set. The bridge frame inside the building can be independently erected or attached to various buildings and pipe gallery supports.

Introduction of the product:There are various specifications for molded cable trays, mainly including the following:1. Structural types: including tray type (P), trough type (C), ladder type (T) and other types to meet different cable laying needs.2. Size specifications: Common specifications include 100100, 10040, 12050, etc., as well as larger sizes such as 200mm × 80mm, 200mm × 100mm, 300mm × 100mm, etc. In addition, there are some special or large specifications such as 250125, 250 * 150, 800mm × 300mm, 1200mm × 200mm, etc., which meet the cable laying requirements of different places.

Introduction of the product：1.Wire mesh cable trays have high strength to support large quantities of network cables.2.Resist corrosion, heat because of pre-galvanized, hot-dipped galvanized, powder coated surface treatment.3.Excellent ventilation and heat dissipation performance, which can save the lost in the process of power transmission;4.

Introduction of the productCable trays are divided into trough type, tray type, ladder type, mesh type and other structures, consisting of brackets, support arms and installation accessories. The bridge frame inside the building can be independently erected or attached to various buildings and pipe gallery supports. It should reflect the characteristics of simple structure, beautiful appearance, flexible configuration, and easy maintenance. All parts need to be galvanized.

Introduction of the product:Long span fireproof cable tray, is a type of cable tray specially designed for cable laying over long distances, commonly available in channel and ladder type, capable of providing support between long spans, and usually used in industrial facilities, buildings, bridges or tunnels. It is mainly used where cables need to be laid over long distances, avoiding the need for frequent support points midway.

Introduction of the product：The structural forms of VCI cable trays mainly include three types: stepped, tray, and trough:1. Cascade type: It has the advantages of light weight, low cost, easy installation, good heat dissipation and ventilation, and is suitable for laying cables with larger diameters.2. Tray type: light weight, large load capacity, beautiful appearance, simple structure, easy installation, suitable for laying small diameter strong and weak current cables.3.

Introduction of the product：Advantages of hot-dip galvanized cable tray:(1) A thick and dense pure zinc layer covers the surface of the steel, which can prevent the steel substrate from coming into contact with any corrosive solution and protect the steel substrate from corrosion. In the general atmosphere, a thin and dense layer of zinc oxide is formed on the surface of the zinc layer, which is difficult to dissolve in water and therefore plays a certain protective role on the steel substrate.

Product description:Polymer bridge, also known as polymer cable tray, is a new type of polymer composite products, which is widely used in various cable routing systems. This type of cable tray not only inherits the load capacity of the traditional metal cable tray, but also combines the insulating and flame retardant properties, corrosion resistance, and long service life of plastic products.

Introduction of the product：Tray type cable tray is a device used to support and manage cables, typically made of metal or plastic materials. It adopts a tray style structure, which can be easily installed and disassembled, thus achieving rapid layout and adjustment of cables. The main features of tray type cable trays include:1. Simple structure: The design of the tray type cable tray is simple and clear, without too many complex components, making installation and maintenance easy and convenient.2.

Introduction of the product：The surface treatment of tray type cable trays is divided into two types: galvanizing and painting, and special anti-corrosion treatmnt can be carried out in heavily corrosive environments.The tray type cable tray is equipped with a protective cover. If a protective cover is required, it can be specified when ordering or ordered according to the model of the protective cover.

Introduction of the product:Long span fireproof cable tray, is a kind of cable tray especially designed for cable laying over lengthy distances, many times on hand in channel and ladder type, succesful of supplying assist between lengthy spans, and commonly used in industrial facilities, buildings, bridges or tunnels.

Introduction of the productZinc-aluminum-magnesium cable bridge is a new type of cable tray whose surface is protected by zinc-aluminum-magnesium alloy coating. Its alloy coating is made of zinc (Zn ). Aluminum (Al), magnesium (Mg) by high temperature curing to form a dense ternary eutectic structure, so that the surface of the steel plate to form a layer of dense, effective prevention of corrosion of the super coating.

Introduction of the product：When selecting a vertical shaft cable tray, it is necessary to consider the on-site environment and technical requirements. If it is necessary to shield electrical interference or protect against external environmental influences, a specific type of cable tray should be selected. During the installation process, certain technological processes must be followed, including positioning and laying out, embedding iron parts or expansion bolts, etc., to ensure the stability and safety of the bridge.Vertical shaft cable trays play an important role in electrical systems.

Introduction of the productSelf-locking cable tray is a new type of cable tray system, which adopts modern technology and techniques and is characterized by automatic locking function, which can meet the needs of various indoor alignment systems. Self-locking cable tray is a kind of alignment system widely used in various fields such as electric power, communication, computer and so on, and it has many advantages.

Introduction of the product：Basalt cable tray is a new type of conductive non-metallic cable tray reinforced with basalt fibers. Its characteristics and innovative points mainly include:1. Material innovation: Reinforced with basalt fiber, it has excellent electrical conductivity and mechanical strength.2‌. Advanced technology: This project has achieved significant innovative results in the key technology field of conductive non-metallic nano cable tray, and the technical level has reached the international advanced level.3.

Introduction of the product:As an important architectural structural element, perforated cable tray play a vital role in building and industrial wiring. With its porous design and steel construction material, this type of cable tray provides solid support for wire and cable deployment, as well as excellent protection. The main advantages include: Good ventilation and heat dissipation: the perforated cable tray is designed with holes that allow air to circulate, helping to dissipate heat and making it suitable for use in high temperature or high load conditions.