What should I do if the cable rises above the bridge?

If the cable is higher than the bridge, some measures need to be taken to solve the problem. Here are some possible solutions:

1. rewiring: If the cable is not too high above the bridge, rewiring can be considered to allow the cable to bypass the bridge or lower the height of the cable. This can avoid potential risks to cable trays and other cables.  

2. Installation bracket: If the height of the cable is relatively high, it is possible to consider installing some brackets to support the cable. These brackets can be installed on cable trays or other fixed structures to ensure that the height of the cables is controlled.  

3. Adjust the height of the cable tray: If the height of the cable tray is not too high, you can consider adjusting the height of the cable tray to better accommodate the cables. This can control the height of the cable and avoid potential risks to other cables.  

4. Using excessively bent cables: If the height of the cable is not too high and there are no other solutions, it may be considered to use excessively bent cables. This can control the height of the cable and avoid potential risks to other cables.  

In short, if the cable is higher than the bridge, some measures need to be taken to solve the problem. These measures may include rewiring, installing brackets, adjusting the height of cable trays, or using excessively bent cables. The most important thing is to ensure that the height of the cables is controlled to avoid potential risks to the cable tray and other cables.